# Structural Ironworkers

> American Industrial Construction · Hubbard, TX · Open

- **Trade:** Ironworker
- **Base pay:** $40 / hour
- **Per diem:** $1,050 / week per diem · Per Diem $1050.00 / Week
Per Diem - $1050.00 Per Week. Must Work Scheduled Hours to Receive Full Weeks Per Diem
- **Housing:** Not listed
- **Travel:** Travel job
- **Certifications:** NCCER certification (Mentioned)
- **Screening:** Drug screen required
- **Posted:** Today

**How to apply:** Apply on the employer's website, linked from the job page: https://perdiemlist.com/en/jobs/b7e9ef504dd5a2862665430a?utm_source=ai&utm_medium=ai_assistant&utm_campaign=markdown

## Description

Structural Ironworkers Needed As Soon As Possible in Hubbard, Texas at a Data Center.

Hourly Wage Rate - $40.00 Per Hour

Add $1.00 More Per Hour for Having a Current NCCER Plus Certification for Ironworker

Per Diem - $1050.00 Per Week. Must Work Scheduled Hours to Receive Full Weeks Per Diem

Mileage In and Out Up to $600.00 in and $600.00 Out. Must Get a Layoff to Get the Mileage Out.

Hours Worked - 5 - 10's Plus Per Week.

Duration - 3 Plus Months

Drug Test and Onboarding will be Completed on site in Hubbard, TX

Job Summary:

An Ironworker Journeyman has heavy industrial experience as an Ironworker and is skilled in all aspects of safe structural component assembly and maintenance including welding, fabrication, and stress relieving. Experienced in rigging practices, lifting and moving equipment or material on construction sites. An Ironworker Journeyman is also knowledgeable in oxyfuel cutting, identifying and installing iron and supports, and can read structural drawings and detail sheets.

Overview of Primary Duties:

Careful initial planning of the job to be carried out, reading and following erection drawings/plans.

Set up hoisting equipment.

Raises and places structural steel members with basic rigging knowledge for raising and placing structural steel members.

Fastens steel members to the cable of the hoist using a chain, cable, or rope.

Signals worker operating hoisting equipment to lift and place steel members.

Guides member, using tagline to guide it into position.

Pulls pushes, or pries steel members into approximate position while the member is supported by a hoisting device.

Forces members into final position, using turnbuckles, crowbars, jacks, and hand tools.

Aligns bolt holes in steel members using drift pins or spud wrenches.

Verifies vertical and horizontal alignment of members using plumb bob and level.

Bolts aligned members to keep them in position until they can be permanently bolted or welded in place.

Cuts and welds steel members to make alterations using oxyacetylene welding equipment and supplies.

Loads, transports and unloads material, tools, equipment, and supplies.

May assist in lifting, positioning, and securing of materials and work pieces during installation.

Performs minor maintenance or cleaning activities of tools and equipment.

Using cranes to lift and guide individual steel components into position.

Knowledge of crane signals.

Accurately aligning and leveling each steel component into place before bolting and welding them into fixed positions.

Using mobile elevated work platforms, ladders, and lifts as the structure gains height to access sections of the ground

Laying metal decking and installing safety railing as the structure is built up.

Demonstrate Yates Core Values and Principles

Follow Yates Code of Conduct

Safety Responsibilities and Expectations

Responsible for refusing unsafe work and for carrying out all work by the established Yates Safety Procedures and Work Practices

Report all incidents, near hits, and hazards to management.

Required to wear and maintain personal PPE.

Advise fellow employees of hazardous situations.

Participate in workplace inspections.

Comply with statutory requirements, including duty of care.

Participate in required and assigned training.

Provide suggestions to improve Safety.

Present a mature approach to working safely.

Attend prestart and Safety meetings and contribute.

Other related duties as needed and assigned by Field Supervision.

This is not an all-inclusive list of tasks an employee may be asked to do. Employees are expected to complete any tasks they are assigned.

Qualifications:

Level III:

Four (4) + years of heavy industrial-related ironwork experience

NCCER Ironworker journeyman certification

Level II:

Four (4) + years of heavy industrial-related ironwork experience

NCCER “Performance” Ironworker journeyman verification

Other verified experiences or certifications with ironworker experience

Level I:

Four (4) + years of heavy industrial-related ironwork experience

Requirements:

Read ISO's, Blueprints, P&IDs, and Shop Drawings

Must have the ability to read and interpret instructions and documentation

Personal hand tools required for craft as established on the Yates Industrial Minimum Tool List

Successful completion of required Safety training to include, but not limited to, Confined Space, LOTO, and Working at Heights

Physical Demands/Essential Job Functions:

This job description reflects an assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. This is not an all-inclusive list of functions that an employee may be asked to do. Employees are expected to complete any tasks they are assigned.

Physical requirements for this role may include but are not limited to:

All weather conditions at varying temperatures

Work at varying elevations

Will work in windy and dusty environments

Moderate to high noise levels

The project site will contain light to heavy equipment vehicles, small to large equipment, materials, communication equipment, and tools

Ability to hear bells, whistles, and alarms

Required to wear safety-approved body harnesses when working at 4’ or above

Required to adhere to large amounts of standing, walking, bending, squatting, climbing, and lifting

Ability to talk and hear to communicate

Will use arms and hands to signal, grab, hold, turn, push, and pull objects, materials, controls, and tools

Must be able to lift, carry, and move heavy objects up to 25 lbs.

Will use vision abilities to focus, see short and long distances, colors, depth perception, and peripheral vision

About Yates Construction

Ranked among the top commercial and industrial construction companies in the country by Engineering News-Record, Yates Construction is family-owned. It provides a wide range of construction and building services. Incorporated in 1964 by William G. Yates Jr., we have steadily grown to become…

## Requirements

Level III:

Four (4) + years of heavy industrial-related ironwork experience

NCCER Ironworker journeyman certification

Level II:

Four (4) + years of heavy industrial-related ironwork experience

NCCER “Performance” Ironworker journeyman verification

Other verified experiences or certifications with ironworker experience

Level I:

Four (4) + years of heavy industrial-related ironwork experience

Requirements:

Read ISO's, Blueprints, P&IDs, and Shop Drawings

Must have the ability to read and interpret instructions and documentation

Personal hand tools required for craft as established on the Yates Industrial Minimum Tool List

Successful completion of required Safety training to include, but not limited to, Confined Space, LOTO, and Working at Heights

Physical Demands/Essential Job Functions:

This job description reflects an assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. This is not an all-inclusive list of functions that an employee may be asked to do. Employees are expected to complete any tasks they are assigned.

Physical requirements for this role may include but are not limited to:

All weather conditions at varying temperatures

Work at varying elevations

Will work in windy and dusty environments

Moderate to high noise levels

The project site will contain light to heavy equipment vehicles, small to large equipment, materials, communication equipment, and tools

Ability to hear bells, whistles, and alarms

Required to wear safety-approved body harnesses when working at 4’ or above

Required to adhere to large amounts of standing, walking, bending, squatting, climbing, and lifting

Ability to talk and hear to communicate

Will use arms and hands to signal, grab, hold, turn, push, and pull objects, materials, controls, and tools

Must be able to lift, carry, and move heavy objects up to 25 lbs.

Will use vision abilities to focus, see short and long distances, colors, depth perception, and peripheral vision

About Yates Construction

Ranked among the top commercial and industrial construction companies in the country by Engineering News-Record, Yates Construction is family-owned. It provides a wide range of construction and building services. Incorporated in 1964 by William G. Yates Jr., we have steadily grown to become one of the nation's top commercial and industrial construction companies. We are financially sound, with a significant bonding capacity and vast personnel and equipment resources.

Our portfolio includes commercial and industrial projects from various sectors, including arts and culture, civil, commercial, education, entertainment and gaming, federal, healthcare, hospitality, manufacturing, municipal, retail, and technology. We work hard to understand our client's business needs and continually look for opportunities to add value to them and their projects.

Our client relationships are the foundation of our success, and our primary goal is to help each client…

More jobs like this: https://perdiemlist.com/en/trades/ironworker.md

---

PerDiemList for AI agents: https://perdiemlist.com/llms.txt (index) · https://perdiemlist.com/agents.md (how to search and cite)
